Skip to main content
My bag (0) Close Cart

CARE & REPAIR

Handmade with love, our jewellery pieces are made from raw materials. Therfore they are vulnerable and need to be handled with care. Avoid wearing jewellery when showering, swimming, sunbathing, cleaning or performing sport activities. Protect your jewellery from sharpness, scratching and extreme heat or cold. Keep dry and store these beauties safely.

Our jewellery pieces do not like getting wet. Precious metals and platings will naturally tarnish when exposed to oxygen. Depending on various factors like type of skin, frequency of wearing and way of treating, the jewellery pieces will eventually wear down and colours might faint. By polishing our metal jewellery pieces gently with a jewellery polishing cloth they will look pretty again.

THE COPPER DOT is made from pure copper. The appearance of this product will change. Copper oxidizes very quick, so the surface will tarnish, not always evenly. Also it has a mirror finish which is extremely delicate. To avoid scratching the mirror finish we advice to leave the surface as untouched possible and enjoy observing the aging process. If you though wish to wipe it use nothing but a soft cotton pad! If you wish to keep it light and shiny a copper polish from your local DIY or drug store will help.

THE PORCELAINE DOT can be cleaned with a sandpaper (grit 400). Gently sand the surface in circles.

VANISHING POINT items can be cleaned with sand paper (grit 240). Lay the paper flat on an even table and move the piece over the paper horizontally. Do not make curving movements to maintain the sharp edges and planar surfaces. Make sure not to sand the chain!

WOODEN DIAMONDS can be cleaned with sand paper (grit 240). Lay the paper flat on an even table and move the piece over the paper horizontally. Do not make curving movements to maintain the planar surface. Do not sand to much, you might remove the thin birchwood layer!